Share This Post

Build It Easily!
Hi, and welcome!
In this guide we are going to explain in some detail how to create and attach a cheap gate using a fence panel and screws.
Plus a bit of wit.
What Do You Need?
- Sandpaper+block ‘o’ wood/electric orbital sander/sanding block (highly recommended)
- Wall plugs (recommended)
- Hammer/house brick
- 2 metal gate hinges
- Pencil/pen
- Electric drill/screwdriver
- Handsaw or jigsaw
- Fence panel
- Small nail(s)
- 1-inch screws x8
- 2-inch screws x16
- Goggles & mask if using power tools
- Large 3-inch nails x6 (optional)
- Tape measure (optional)
- Spirit level (optional)

Use the tool set above, or the tool set below, maybe not both, although a hammer is always good to have.

Share This Post
Pages: 1 2